ROEOUE — Installation Guide

Everything you need to install your graphene floor heating system in just one weekend.

📹 Video Overview

Step-by-Step Installation

Step 1: Clean the Floor

Clean and prepare a dry, flat floor surface free of dust and debris. Ensure the subfloor is level and moisture-free before proceeding.

Step 2: Lay Out and Secure the Heating Film Modules

Peel off the protective adhesive backing on each module. Following the floor plan layout, press each module firmly onto the floor surface. Connect the plug connectors between adjacent modules as indicated in the diagram.

Step 3: Thermostat Wiring & System Test

Connect the power leads to the thermostat according to the wiring diagram. Check all connections carefully, then power on for a system test. Verify the film heats evenly before proceeding.

Step 4: Install Flooring

Cover the heating film with your chosen flooring. ROEOUE heating film is compatible with hardwood, laminate, engineered wood, and vinyl flooring. Note: This system is not suitable for use under ceramic or stone tiles.